© Owned by UFCOR SDN BHD

1/2

ULTRACOR

Product Summary

Ultracor ultrafiltration membrane modules are designed to ensure economical and reliable solutions for water treatment applications. Ultracor membrane is made of Polyethersulfone and consists of a 3-layer structure that provide superior permeability and strength using innovative membrane support.

Ultracor membrane exhibits extreme hydrophilic characteristic reducing the potential of fouling while achieving high volume flow at low transmembrane pressure reducing energy costs which results in low operating costs.

 

Ultracor pressure driven Inside-Out Filtration

Backwashing Ultracor I-O membrane is much more effective than the O-I membrane by the fact that concentrate is flushed out through a well-defined circular membrane inner wall, whereas low flow dead zones exist outside of the hollow fibre membranes in the O-I formats during back-wash.

 

Pressure driven Inside to Out advantages

Ultracor Polyethersulfone (PES) membrane are durable, highly permeable with narrow pore size distribution and do not require air scouring. By design the hydrodynamic conditions of Ultracor membrane create superior back-wash performance with low operating costs.

 

Normal Operation

During normal operation, feed water enters the top centre port and bottom side port of the module to the inside (lumen) of the filter. Using pressure, treatment water is driven through the membrane wall and out of the module through the upper side port to the filtrate tank. While operating, 100% of the feed water is converted to filtrate.

Ultracor ultrafiltration membrane modules are designed to ensure economical and reliable solutions for water treatment applications. Ultracor membrane is made of Polyethersulfone and consists of a 3-layer structure that provide superior permeability and strength using innovative membrane support.

Ultracor membrane exhibits extreme hydrophilic characteristic reducing the potential of fouling while achieving high volume flow at low transmembrane pressure reducing energy costs which results in low operating costs.

 

Ultracor pressure driven Inside-Out Filtration

Backwashing Ultracor I-O membrane is much more effective than the O-I membrane by the fact that concentrate is flushed out through a well-defined circular membrane inner wall, whereas low flow dead zones exist outside of the hollow fibre membranes in the O-I formats during back-wash.

 

Pressure driven Inside to Out advantages

Ultracor Polyethersulfone (PES) membrane are durable, highly permeable with narrow pore size distribution and do not require air scouring. By design the hydrodynamic conditions of Ultracor membrane create superior back-wash performance with low operating costs.

 

Normal Operation

During normal operation, feed water enters the top centre port and bottom side port of the module to the inside (lumen) of the filter. Using pressure, treatment water is driven through the membrane wall and out of the module through the upper side port to the filtrate tank. While operating, 100% of the feed water is converted to filtrate.

1/1

Technical Specifications

Quality 

Membrane Type                    

Membrane diameter            

Housing Material                     

Potting Material                      

Membrane performance     

Module diameter                    

Module length                           

Feed & Filtrate ports               

Backwash frequency            

Minimum operating Temp    

Maximum operating Temp   

PES hollow fibre I/O

1.2 mm/ 0.8 mm

Stainless steel

Polyurethane 

MWCO 70KD ± 20KD

285 mm

1,225 mm

40 mm (1½”)

Site specific

>0° C

40° C

Our Ultrafiltration filters are manufactured under a fully integrated quality management system conforming to: 

  • ISO 9001

  • ISO 13485

  • ISO 14001

  • ISO50001

  • ISO 46001

  • OHSAS 18001

Our Polyurethane manufacturing is fully supported by quality assurance operating to: ISO9001 standard and NATA registered analytical services.